Setting Up Your Alarm
Setting up your alarm is simple, you’ll be ready to go in under 5 minutes!
Unpack your alarm, contents include:
- The NoEntry Unit
- Key Fob
- Mains Adaptor
Fit the battery
Remove the magnetic battery cover from the back of the unit, insert the battery with the label facing upwards then replace the magnetic battery cover.
The unit LEDs will cycle, with the blue remaining on.
Plug into mains
Plug the power cable into the side of the unit and the other end into the mains adapter. Plug the mains adaptor into a socket.
Connecting the Keyfobs
To program the key fobs, simply press button one and it will pair with the unit. The LED will turn green and the unit is now ready to use. To add extra key fobs, simply press the number “1” on each fob separately within 30 seconds during the initial setup. The LED will go green when the setup is complete.
To test your unit, press button “2” on the key fob. The unit’s LEDs will turn red and NoEntry will arm.
Test doors from the outside with the handle in its locked position and test windows by opening them as normal.
Press button “1” on the fob to disarm.
To test the panic feature, press button “3”. Disarm with button “1”.